1. PULL CHAIN:
• Attach fan pull chain extension (BB) and light
pull chain extension (CC).
NOTE:
• The fan pull chain is for motor speed control:
High, Medium, Low and Off.
Pull chain once for each position.
• The light pull chain controls the light fixture
either ON or OFF with each pull of the chain.
OPERATING INSTRUCTIONS
BB
CC
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan does not move. 1. Chain switch is “off”.
2. Faulty wire connection.
3. Reverse switch not engaged.
1. Pull chain switch.
2. Turn power off. Loosen canopy,
check all connections.
3. Push switch firmly either way.
Noisy operation.
1. Blades are loose.
2. Cracked blade.
3. Unapproved speed control.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
3. Replace with an approved speed
control device.
Excessive wobbling. 1. The blades are loose.
2. Blade arms incorrectly attached.
3. The fan is not securely mounted.
4. Fan too close to vaulted ceiling.
1. Tighten all blade screws.
2. Reinstall blade arms.
3. Turn power off. Carefully loosen
the canopy and remount securely.
4. Lower fan or move it to another
location.
TROUBLESHOOTING
CARE AND MAINTENANCE
• Important: Shut off main power supply before beginning any maintenance.
• Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
• Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades
for added protection.
• At least twice a year, tighten all screws and lower canopy to check mounting bracket screws and
downrod assembly.
• Bulb replacement: Use B10 5 watt max. medium-base E26-type LED bulbs.
15
14
16. Install the previously removed screw (step 14, page
13) and securely tighten all the screws.
16
FINAL INSTALLATION
