14
FINAL INSTALLATION
4. Install the blade arm (O) to the underside of the motor
assembly (G) with motor screws (Q) previously removed
(Step 6, page 8). Tighten with Phillips screwdriver.
Repeat for each blade arm (O).
Note: If you wish to install the fan without the light kit (I)
,
proceed to Step 9.
5.
To install the light kit (I),
first remove the three switch
housing screws (U) from the top edge of the light kit (I).
Then connect the single-pin connector from the switch
housing (H) to the single-pin connector from the light kit
(I) -- Blue to Black and White to White.
Note:
Align the notch in the light kit (I) with the reverse
switch on the switch housing (H).
6. Secure the light kit (I) to the switch housing (H) using
the previously removed switch housing screws (U).
4
5
O
H
I
U
Q
G
6
U
I
Notch
H
Reverse
Switch