9
Lowes.com/harborbreeze
INITIAL INSTALLATION
6 . Insert the downrod (A) -- or a longer downrod, if
required -- through the canopy (E), canopy cover (F)
and yoke cover (I) . Feed the wires and braided cable
from the fan through the downrod (A) .
7 . Slide the downrod (A) into the yoke of the motor
assembly (G), align the holes, then re-install the
downrod pin (B) and downrod clip (C) . Secure with set
screws (P) and slide the yoke cover (I) down until it
rests on top of the motor assembly (G) .
8 . Depending on the length of downrod you use, you
may need to cut the lead wires back to simplify the
wiring . If you decide to cut back the lead wires, it is
suggested you do so in the following manner: Take
the lead wires and make sure you have pulled them
all the way through the top of the downrod . Measure
8 inches of lead wire, then cut the excess wire off with
wire cutters (not included) .
A
I
C
A
I
P
B
G
E
F
6
7
8
