10
Lowes.com/harborbreeze
INITIAL INSTALLATION
9 . If you decided to cut back the lead wire in Step 8, strip
1/2 in . of insulation from the end of the white wire .
Twist the stripped ends of each strand of wire within the
insulation with pliers (not included) . Repeat the step for
black and green wires .
Note:
If you did not cut back the lead wires in Step 8,
Step 9 is not necessary and you may proceed to Step
10 instead .
10 . Install the downrod (A) into the opening of the mounting
bracket (D) . Align one slot in the downrod (A) with the tab
on the mounting bracket (D) .
Immortant:
The downrod (A) should not rotate in the
mounting bracket (D) if installed properly .
DANGER:
Failure to align the slot in the ball with
the tab may cause the fan to wobble or fall, which could
result in serious injury or death .
A
A
D
D
Tab
Slot
10
9
