21
Lowes.com/harborbreeze
CARE AND MAINTENANCE
At least twice each year, lower the canopy to check the downrod assembly, and then tighten all
screws on the fan . Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching
the finish. Clean the blades with a lint-free cloth. You may occasionally apply a light coat of furniture
polish to wood blades for added protection .
Impootaat:
Shut off the main power supply before you begin any maintenance task . Do not use water
or a damp cloth to clean the fan .
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan does not
move .
1 . The reverse switch is not
engaged .
2 . The wall switch is turned off .
3 . The power is off or the fuse
(breaker) is blown .
4 . There is a faulty wire connection .
5 . The remote control battery power
is off .
6 . The dip switch settings are
incorrect in the remote control .
1 . Firmly push the reverse switch
to either the left or right .
2 . Make sure the wall switch is
turned on .
3 . Turn the power on or check the
fuse (breaker) .
4 . Turn the power off and check all
connections at the ceiling outlet
box .
5 . Install a new battery in the
remote control .
6 . Refer to the Operating
Instructions to set the dip
switches .
The fan is noisy .
1 . The blades are loose .
2 . There is a cracked blade .
3 . The wall control is not compatible
with the fan .
4 . The break-in period has not
surpassed .
5 . The outlet box is not secure .
6 . The mounting bracket is not
secure .
7 . The speed control device is
unapproved .
1 . Check and tighten all screws
that hold the fan blades to the
blade arms and the motor .
2 . Replace the cracked blade .
3 . Do not use a full range dimmer
switch to control the fan speed .
4 . Run the fan continuously for 24
- 48 hours on medium or high
speed for a “break in” period .
5 . Ensure the outlet box is secured
to the building structure .
6 . Ensure the mounting bracket is
secured to the outlet box and
that the screws are tight .
7 . Replace the speed control
device with an approved remote
control .
