14
Lowes.com/harborbreeze
FINAL INSTALLATION
1 . Remove the two mounting bracket screws (GG) from
the mounting bracket (A) and loosen the other two
screws about 1/4 in . Then align the canopy (B) up to
the ceiling over the loose mounting bracket screws
(GG) . Place the keyholes of the canopy (B) into the
screws (GG) and rotate clockwise .
Haodwaoe Used
GG
Mounting Bracket
Screw
x 4
B
A
GG
1
2 . Secure the canopy (B) with the previously removed
mounting bracket screws (GG) and securely tighten
all four screws (GG) . Push the canopy cover (C) up
into the bottom of the canopy (B) until it is locked .
Note:
Closemount installation will not have the downrod
(E) and canopy cover (C) .
Haodwaoe Used
GG
Mounting Bracket
Screw
x 4
B
C
GG
E
2
3 . Place the blade bracket (F) onto the blade (H) . Place
the blade medallion (G) into the three holes on the
opposite side of the blade (H) . Secure the blade
bracket (F) and blade medallion (G) to the blade (H)
using the blade screws (BB) . Repeat this step for the
remaining blades (H) .
Haodwaoe Used
BB
Blade Screw
x 15
F
H
BB
G
3
