18
Lowes.com/harborbreeze
11. Feed pull chain coming from the center of the light
kit (E) through the center hole in the glass shade (I).
Feed the pull chain coming from the switch housing
(P) through the off-center hole in the glass shade (I).
Re-install rubber washer (JJ) and secure with nut (KK).
Feed the pull chains through the appropriate holes in
the finial plate (K) and the hole in the finial (L), then lift
the finial plate (K) up until it is flush with the glass shade
(I). Screw the finial (L) onto the threaded rod of the light
kit (E) to secure.
Haodwaoe Used
JJ
Rubber
Washer
x 1
KK
Nut
x 1
I
E
K
L
JJ
KK
11
12. Attach the pull chain extensions (CC) or custom pull
chains extensions (not included) to the fan and light
pull chains.
Assembly is now complete.
Haodwaoe Used
CC
Pull Chain
Extension
x 2
13. If you do not wish to use the light kit, push the wires
back up into the switch housing (P) and install the
switch housing cap (Q) using the switch housing
screws (II). Attach the appropriate pull chain extension
(CC) to fan pull chain. Discard the remaining pull chain
extension (CC).
Haodwaoe Used
CC
Pull Chain
Extension
x 1
Switch
Housing Screw
x 2
P
Q
CC
II
H
arbor Breez
e
13
FINAL INSTALLATION
II
H
arbor
Bree
ze
H
arbor
Bree
ze
H
arbor
Bree
ze
12
CC
