8
INITIAL INSTALLATION
4. Loosen all four mounting bracket screws (P) on
mounting bracket (D), then completely remove the two
mounting bracket screws (P) from the round holes of
canopy (E). Set aside for later use.
Detach mounting bracket (D) from canopy (E).
5. Secure the mounting bracket (D) to the outlet box
using screws and washers provided with the outlet
box.
CAUTION:
It is very important you use the proper
hardware when installing the mounting bracket (D) as
this will support the fan.
6. Remove the 6 preassembled motor screws (J) from
the underside of the motor assembly (G) and save for
blade arm (N) attachment.
Note:
The notch in the preassembled fitter plate (H)
allows a Phillips screwdriver (not included) access to
motor screws (J).
5
D
D
J
G
D
P
E
Standard
Mount
Angle Mount
6
Notch
4
