13
FINAL INSTALLATION
1. Align the canopy (E) over the loose mounting bracket
screws (P) preassembled on mounting bracket
(D). Place the keyholes of the canopy (E) onto the
mounting bracket screws (P) and rotate the canopy
(E) clockwise.
Secure the canopy (E) with the mounting bracket
screws (P) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (P) securely.
2. Insert the blade screws (BB) along with the blade
washers (CC) through the blade (O) and into the
blade arm (N) and secure with a screw cap (LL).
Repeat this step for the remaining blades (O) and
blade arms (N).
Hardware Used
BB
Blade Screw
x 9
CC
Blade Washer
x 9
Screw Cap
x 9
3. Secure the blade arm (N) to the underside of the
motor assembly (G) using motor screws (J) previously
removed (Step 6, page 8). Completely secure each
blade arm (N) to the motor assembly (G) before
moving to the next.
Note:
The notch in the preassembled fitter plate (H)
allows a Phillips screwdriver access to motor screws
(J).
E
D
CC
N
LL
BB
O
P
1
2
LL
3
J
G
N
Notch
