6.
10
DOWNROD-STYLE FAN MOUNTING
Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align one of the slots in
hanging ball with tab in mounting bracket (C).
DANGER
: Failure to align one of the slots in
the ball with the tab may result in serious injury or
death.
Continue to
WIRING
on page 12.
CLOSEMOUNT-STYLE FAN MOUNTING
Remove preassembled canopy cover from bottom of
canopy (B).
NOTE
: To remove canopy cover from
canopy (B), twist canopy cover until the two small
protrusions on the inner lip of the canopy cover align
with the two notches on the bottom of the canopy
(B). Pull on canopy cover to remove.
NOTE
: The downrod (A) and canopy cover are not
used in this type of installation.
1.
1
Canopy
Cover
B
Slot
Tab
C
6
Remove every other preassembled screw and lock
washer from top of motor housing (D).
2.
2
Screw
Lock Washer
A
D
