13
FINAL INSTALLATION
4. To install the light kit (K), connect the single-pin connector
from the motor assembly (G) to the single-pin connector
from the light kit (K) -- Blue to Black and White to White.
Reinsert two previously removed fitter plate screws (I)
(step 6, page 8) into the fitter plate (H), but do not tighten.
Place the keyholes of the light kit (K) over the fitter plate
screws (I) and turn clockwise. Secure the light kit (K)
with the remaining previously removed fitter plate screw
(I). Tighten all three fitter plate screws (I).
5. Lift the glass bowl (L) over the light kit (K) and turn in a
clockwise direction until it is secure.
6. If desired, the mounting bracket in remote pack (M)
can be installed to a wall using the provided mounting
screws. The remote from remote pack (M) can be
stored in the mounting bracket for easy access.
4
5
H
K
I
6
L
K
Single-pin
Connector
Wall Bracket
Screws
Wall Bracket
Small Plate
