12
FINAL INSTALLATION
1. Align the canopy (E) over the loosened mounting
bracket screws (R) preassembled on mounting bracket
(D). Place the keyholes of the canopy (E) onto the
mounting bracket screws (R) and rotate the canopy (E)
clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (R) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (R) securely.
3. Partially insert the blade screws (BB) along with blade
washers (CC) through the blade (P) and into the blade
arm (J). Tighten each blade screw (BB) with a Phillips
screwdriver (not included), starting with the one in the
middle. Repeat this step for the remaining blades (P)
and blade arms (J).
Hardware Used
BB
Blade Screw
x 24
Blade Washer
x 24
1
2
E
E
R
D
R
3
CC
CC
P
J
BB
