8
L2404-USB
USB MIXER
L2404FX-USB Owner's Manual
11
Pan
The Pan control moves the signal between the left and right outputs. When turned fully to the left,
that channel will only show up on the left main output. When turned to the center, it will be sent in
equal volumes to the left and right outputs. Turned fully to the right, you will only hear it through the
right output.
9
Aux Sends
The Aux Send is a separate bus on the L2404FX-USB mixer. This means that you can have a different
mix on the aux bus than you do on the main outputs. This comes in handy in a few scenarios:
• Sending different amounts to the effects section, so that some instruments have more reverb
than others
• Setting up a headphone mix, so that a recording musician can hear exactly what they want
while you listen to your own mix
• Creating a monitor mix on stage, so that band members can hear what they need to perform
while you mix for the rest of the audience
8
EQ Section
The Mono channels of the L2404FX-USB have a 3 band EQ with a sweepable mid frequency. The
high and low equalizers are shelving filters that are plus or minus 15dB at their frequency bands.
The high EQ boosts or cuts all frequencies above 12kHz. Turn it up to bring out the breath of a
vocal or the high overtones of the cymbals. Turn it down to reduce finger squeaks on a guitar or
bass. The low EQ boosts or cuts all frequencies below 80Hz. Turn it up or down to change the
character of the kick drum, bass guitar or the lower octaves of a keyboard or piano. The mid EQ is
a semi-parametric EQ that has an adjustable frequency between 100Hz and 8kHz. Use the Mid
knob to set the amount of boost or cut and use the Freq knob to set the frequency.
Pre/Post Fader Button
This button switches the fader control from Pre or Post. For normal mixing operations, set the button
to Post Fader. If using the Aux bus for monitoring set it to Prefader.
10
Summary of Contents for L2404FX-USB LvL series
Page 1: ...L2404FX USB USB MIXER ...
