13
www.HarbingerProAudio.com
L2404-USB
USB MIXER
25
Control Room and Phones Knobs
These set the level of the outputs to the control room and headphones.
26
2 Track to Mix
The 2TR to Mix button routes the 2 Track stereo RCA inputs to the main mix. The level
of this input is controlled by the output level of the external audio device.
27
Power LED
Indicates that the mixer is on.
28
48V Phantom Power LED
Indicates that the main phantom power switch is turned on (switch on the back panel).
Aux Send Knobs 1-4
These determine the master output level of all of the individual Aux Sends. There is a solo
button to solo the specific Aux Send.
Aux Send Knob 4 FX
This aux send can be routed to the Aux Send 4 Output, just as is done with Aux Send Knobs
1 – 3, however, it is also routed to the internal Multi Core effects module. The aux bus with
effects applied is routed to the DSP Effects Output, which can in turn be routed with a cable
to an external audio source. When a cable is inserted into the DSP Effects Output, the solo
button will solo the Aux Send 4 post the internal Multi Core effect module.
29
Summary of Contents for L2404FX-USB LvL series
Page 1: ...L2404FX USB USB MIXER ...
