11
www.HarbingerProAudio.com
L2404-USB
USB MIXER
CONTROL SECTION
This area of the mixer is used to route the signal paths that come from the input channels
to the Main Outputs, Subgroups or Aux Send/Returns. It is also where the controls for
the Multi Core effects processor are located.
21
2TK Input and Output
These 2 Track unbalanced stereo RCA inputs can be used for connecting additional external
stereo audio sources such as CD players, tape machines or mobile devices. This stereo input can
be routed to the Control Room Outs, Phones or Main Outputs by pressing the appropriate switch
in the control section. The 2 Track outputs mirror the Main Mix output and their level is controlled
by the master fader.
20
Balance (BAL)
The Balance knob has a similar effect to the pan control explained in the previous section, but the
balance control just turns down one input or the other. As you turn the Balance knob to the right,
the signal coming into the Left/Mono input gets softer. This allows you to control the panning in
your mix without collapsing the stereo width of the input.
Effects Footswitch Input
This input is for an external footswitch controller that
can be used to turn on and off the internal Multi Core
Effects Processor.
22
Phones Output
This is a stereo output for driving a pair of headphones. The
output level is controlled by the Control Room/Phones knob.
23
Summary of Contents for L2404FX-USB LvL series
Page 1: ...L2404FX USB USB MIXER ...
