5
ENG
ENG
Congratulations on the purchase of your Hapro sunbed. Your new sunbed has been
manufactured with the utmost care and attention and consists of high-quality parts.
All Hapro sunbeds have been developed to give you the best possible tan, whilst
complying with the strictest applicable European standards.
Model
: XXXXX
Type
: XXXXXXXX
Serial number
: XXXXXXXXXX / 3
Rated voltage
: XXXXXXXX
Rated power input
: XXX W
With Airco
: XXX W
Manufactured by: Hapro International B.V.
PO Box 73
4420 AC Kapelle, Netherlands
XXXXX_XX
UV type 3 (Total Erythema output limited at 0,3W/m
3
)
30 x
max
light 160W-R CE III
160-R-(21-28)/(2,2-3)
22 x
max
light XL180W-R CE III
180-R-(21-28)/(2-2,6)
22 x
max
light HP 500W S or
max
light HP 500W D
Main Filter: SPS (Art. nr. 15691) Ballast: 320W
Lamp information
The lamps listed below are those that are installed as standard equipment at the factory. These standard lamps have been selected for
optimal tanning results and to match the UV classifi cation of your tanning unit. We recommend that when you replace a lamp you only
use lamps of the type currently installed in your tanning unit and which are listed in the table below and on the identifi cation plate. If you
choose to install a diff erent type of lamp, you must only use lamps that are marked with an equivalent code which indicates that the UV
component falls within the equivalence range listed on the identifi cation plate.
Lamps
Art nr
equivalent code
UV type (EU countries)
UV type (non-EU countries)
maxlight 25W CE III
23023
30-O-(2-3)/(42,5-57,5)
3
3
maxlight 100W-R CE III
12797
100-R-(17-22)/(2,1-2,9)
3
3
maxlight 100W-R CE 0,3
16997
100-R-(20-27)/(2,3-3,1)
2
3
maxlight 100W-R High Intensive
12801
100-R-(38-50)/(5,1-6,9)
may not be used
5
maxlight XL 120 W-R CE III
12810
120-R-(27-36)/(2,8-3,8)
3
3
maxlight XL 120 W-R High Intensive
15898
120-R-(68-90)/(7,9-10,7)
may not be used
5
maxlight 160W-R CE III
12814
160-R-(21-28)/(2,2-3)
3
3
maxlight 160W-R CE 0,3
17001
160-R-(20-27)/(1,5-2,1)
2
3
maxlight 160W-R High Intensive
15899
160-R-(77-102)/(6,9-9,3)
may not be used
5
maxlight XL 180W-R CE III
12818
180-R-(21-28)/(2-2,6)
3
3
maxlight XL 180W-R CE 0,3
17002
180-R-(24-32)/(1,7-2,3)
2
3
maxlight XL 180W-R High Intensive
12821
180-R-(86-114)/(6,7-9,1)
may not be used
5
maxlight HP 400W D
12526
not applicable
not applicable
not applicable
Lamps (IP-control)
Art nr
equivalent code
UV type (EU countries)
UV type (non-EU countries)
maxlight 80-180W-R IPcontrol CE/N III
19446
180-R-(37-49)/(3,4-4,6)
not applicable
not applicable
maxlight XL 80-180W-R IPcontrol CE/N III
19447
180-R-(38-50)/(3-4)
not applicable
not applicable
Power facial tanner
Glass fi lter
UV type (EU countries)
UV type (non-EU countries)
300W
HPS
2
2
400W
HPS
may not be used
2
300W
SPS
3
2
400W
SPS
2
2
300W
BPS
3
3
400W
BPS
3
3
Note: The total erythema is limited to 0.3 W/m² for all UV types within the EU.
Note: The equivalent code is only applicable to low-pressure fl uorescent lamps.
Example:
On the example identifi cation plate shown below the equivalent codes for the installed canopy and bench
lamps are circled.
The equivalent code for the canopy is 160-R-(21-28)/(2.2-3)
160 = the wattage of the lamp
R =
the refl ector type
(21-28) = the equivalence range for the total eff ective erythema
(2.2-3) = the equivalence range for the NMSC ratio
If you intend to install a new lamp, the wattage and refl ector type must always match the equivalent code
on the identifi cation plate. The eff ective erythema and NMSC ratio must also match the specifi ed range.
You may only use a lamp other than the recommended type if all of these criteria are met. You must also be
aware that:
a. The tanning unit is likely to be less eff ective in terms of tanning performance.
b. The circuit protection for your tanning unit must be adapted because the electrical current
consumption will have changed.
c. The UV classifi cation no longer matches the original classifi cation shown on the identifi cation plate.
d. We will not necessarily honour warranty claims arising from the use of lamps other than those we
recommend, because the technical operation of your tanning unit might be aff ected.
