15
How to Update Internal Monogramming Data
2-3-5
1. Update for Internal Monogram data.
Insert CF card saved update data. Refer to “3-1 How to
enter maintenance mode” and enter maintenance mode.
Display comes as below.
2. Place cursor at [ Install ] by button and press SET
button.
3. Showing menu on right side of screen
Select [ letter font ] by button and press SET button.
4. Display comes as below after reading data in CF card
5. Press SET button for start update of monogram data.
<NOTE>
Please do not take out CF card during installation
For cancel, press ESC button and back to last menu.
6. When completed, comes as below display [ complete ] and
reboot machine automatically.
Please retry when you have display as “Error” by mistake of
writing.
* End of process
[Maintenance]
Machine : A
Angle. : 0
Memory. :
Display : 1
> Install :
Record :
[Maintenance]
Machine : A
Angle. : 0
Memory. :
Display : 1
> Install. :
Record :
install
prog
>. lettr font
[Maintenance]
[ Lettr install ]
> 1 : LTR * * *
Write 1.01[ * * * * ]
- - - - - > Complete
