6
3. Loosen screw for needle bar boss and take the following
items out ;
* Pressure foot spring (lower)
* Pressure foot block
* Cushion
* Pressure foot boss
* Pressure foot spring
4. Press Needle bar down and tighten screw for needle bar
boss.
Please set direction of needle bar as photo below (2 holes
of needle bar face to left side).
5. Set Blade holding bracket to Needle bar and fix by Cap
screw M3x5 at lower hole of needle bar. Then tighten Cap
screw M4x10.
Pressure foot boss
Cushion
Pressure foot spring
Pressure foot block
Screw for needle bar boss
Cap M3x5
Cap M4x10
Pressure foot spring
Screw for needle bar boss
