3
1. Required Parts and Steps of installation
For making Borer embroidery on HCR machine, the below Borer device set is required. (Required same quantity of number of
machine head)
Also Needle plate (universal) which has hole for Borer blade is required to use Boer device.
In case your machine does not have this type of needle plate, please prepare this needle plate too.
HCRU49010 Borer device set
3
5 6 7
4
2
1
HCR04130 Needle plate(universal)
Borer device set
1 Blade holding bracket (QTY:1)
2 Borer blade (QTY:1)
3 Blade cap (QTY:1)
4 Blade cover (QTY:1)
5 Borer plate (QTY:1)
6 Cap screw M3x5 (QTY:1)
7 Cap screw M4x10 (QTY:2)
Flow for setting of Borer device
Change Machine setting Installation of Borer device
Please start setting with the following operation order.
