EN
(96)
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
Good
Worn
1. Whether the sprockets have
excessive abrasion
2. Whether wheel teeth are broken
or damaged
3. Whether the sprocket is loose
Cleaning and lubrication of drive chain
Dirty drive chain will not only speed
up wear of the chain itself, but also
damage the sprocket.
Therefore,
following the cycle in the “regular
maintenance tabel”, the chain must
be cleaned and lubricated with chain
oil or engine oil after being cleaned with detergent liquid.
Adjustment of drive chain sag
Adjust the drive chain to keep it in a normal state.
If
the riding conditions are harsh, the times of adjustment
should be more frequent than that of regular maintenance.
B
WARNING
An excessively loose chain will result in the chain
coming off the sprocket, resulting in an accident
or seriously damage to the engine. Please adjust
the drive chain in accordance with the methods
described below.
10–20mm
1. Support the motorcycle with the main stand.
2. Loosen the rear axle nut
4
.
3. Loosen the lock nut
2
on the adjusting bolt
1
.
4. Turn the adjusting bolt
1
clockwise or anticlockwise
to make the chain slack for 10–20mm. Make the front
and rear chain wheels on a single straight line by
making sure of the left-right consistency of the sign
positions
3
of the rear wheel fork and the left and
right adjusters
5
.
5. After adjusting the tightness of the transmission chain,
tighten the rear axle nut
4
and the lock nut
2
and
then reconfirm the tightness of the transmission chain.
B
CAUTION
The drive chain of this motorcycle is made
of special materials carefully processed.
Use
authentic parts (428HG 116 links) when replacing
the drive chain.
Using parts with different
specifications may cause early damage to the
chain.
NOTE: Each time when replacing the drive chain, please
check the abrasion conditions of both the front and
(96)
Haojue TZ150S 99011H36640H000 V01 ES+EN 2015-1-17
37
https://www.motomanuals.net/
