English
_63
connecting the iScSi
This function is only available for products that support iSCSI. For products that support iSCSI, refer to the
"
When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect
it.
Setup > Device> Storage device > iScSi
●
Add : Add an iSCSI device.
●
Delete : Delete the registered iSCSI device.
●
Model : Displays the iSCSI model name.
●
iSCSI name : It displays the name of iSCSI in compliance with the iSCSI protocol format.
●
Capacity : It displays the currently used amount/total capacity of iSCSI devices.
●
Status : Displays the status of an installed iSCSI device.
List of products supported
Promise Technology vessRAID 1740i / 1840i / 2600i 1ea JBOD 3ea / SRB-160S
●
ARB : Video that was not recorded due to a camera disconnection can be backed up after the connection with
the camera is re-established. Press the button and an <
auto recovery backup (arB)
> window is opened.
– Select HDD : Select a HDD to be set to ARB.
– Capacity : Shows the capacity of the HDD to be set as ARB.
– Select channel : Select a channel to run the ARB.
￭
You can select multiple channels. If you select <
All channels
>, all channels will be selected.
– ARB bandwidth : Select a bandwidth for the ARB function.
￭
The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the Wisenet protocol.
This is only supported in SUNAPI 2.3.2 or later.
￭
Set the profile bitrate used for recording a video in the SD card of camera to 6144 kbps or below.
For more information on how to set the SD card recording profile, see your camera manual.
￭
To use the ARB function correctly, both the camera and Recorder should be time synchronized with the time server.
Refer to the "
Setup
>
Setting the System
>
Date/Time/Language
" page in the Table of Contents.
￭
ARB function is activated when Recorder starts/when the channel camera set is reconnected/when an Recorder recording missing section
recurs at regular intervals after Recorder starts.
￭
Recorder recording missing section that can be restored with the ARB function is for 24 hours backwards from the point when the ARB
function is activated.
￭
You can check which channels have ARB function activated through the message on each channel screen that is displayed when selecting
a channel.
Refer to the "
Live
>
Live screen mode
>
Channel Information Display
" page in the Table of Contents.
￭
For automatically recovered files through ARB, refer to the "
Search
>
ARB Search
" page in the Table of Contents.
￭
ARB storage capacity is recommended to be at least one day.
Example)
If you saved 64 channels with 1 Mbps each, the ARB capacity should be set to 0.7 TB or higher.
●
HDD map : You can check the location according to the assigned number for the HDDs installed inside.
￭
Refer to this when servicing or installing an additional HDD.
￭
Do not add or remove an HDD while Recorder is running.
• S
etup
Summary of Contents for XRN-6420DB4
Page 1: ...NETWORKVIDEO RECORDER User Manual...
Page 131: ......
