Hanwha Vision QND-8012, User Manual

Page: 9 / 22

English _
9
!
OVER
VIEW
AT A GLANCE
Appearance
Item Description
a
Dome cover
Case cover used to protect the lens and the main unit.
Components
Item Description
a
Lens
Lens for the camera.
b
Micro SD Memory Card
Compartment
Compartment for the Micro SD memory card.
c
PoE Connector
Connects to the network and supplies power through Ethernet cable.
d
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
e
micro HDMI port
Connect to a monitor by using an HDMI gender cable to view the camera feed.
a
RES
ET
d c e
a
b