Hanwha Vision PNM-C34404RQPZ, User Manual

Page: 11 / 29

English _
11
!
OVER
VIEW
AT A GLANCE
Appearance
c
d
e
f
h
g
a
b
Item Description
a
Micro SD Card slot
Compartment for the Micro SD card.
b
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
c
Top Cover
Protects the product from direct sunlight, rain, and external impact.
d
Dome Cover A cover for protecting the lens and camera body.
e
PTZ Dome Cover Protects the lens and camera body of the PTZ camera.
f
IR LED These infrared LED’s are controlled by the illumination sensor.
g
Illumination Sensor
Detects incoming light to control the IR LED.
h
Lens 4 camera lenses show different directions.