installation & connection
16_
installation & connection
Installation (camera body and dome cover)
1.
Connect the safety wire to the mount plate.
2.
Pull out the cable bushing from the camera body, as shown in the figure.
[Installing the network cable] (IP66)
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Camera main: use a cable with the diameter of Ø5 to 6.5
`
You can only use a network cable with a diameter of Ø6.5 or less.
3.
Remove the protruding part on the removed cable bushing.
4.
Use the cap installer to route the network cable through the cable bushing.
5.
Insert the cable bushing of the network cable into the camera body.
Summary of Contents for PNM-C16013RVQ
Page 1: ...NETWORK CAMERA User Manual PNM C16013RVQ...
Page 32: ......