Hanwha Vision HCF-8011RV, User Manual, Page: 29 / 32

English_29
●
C
A
MER
A
OPER
ATION
y
DAY/NIGHT: You can display pictures in color or in black and white.
➊
Select <DAY/NIGHT>.
➋
Select the desired mode.
-
AUTO : Switch to color mode
during the daytime and
b/w at night or in low light.
y
BURST : Activate or deactivate
the burst mode to
maintain or remove the
color signal.
y DURATION : This function is used to select the brightness of light where
switching occurs.
y DWELL TIME : You can select day/night switching delay time from.

3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
`
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night
mode to auto.
`
When a bright light source is in the screen or there are frequent brightness changes, if
you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting
can be caused. In this situation, it is recommended to use the default setting (30 sec).
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
y
IR MODE : When IR LED is turned on in the B/W mode, the saturation at the
center of the screen will be prevented depending on the set screen
size so that the camera can identify a subject even at a close distance.
- RETURN : Return to the SPECIAL menu.
DAY/NIGHT
 1.
BURST ON
2.
DURATION NORMAL
3.
DWELL TIME
3 SEC
4. RETURN