manualshive.com logo in svg

Hanwha Techwin Wisenet XRN-3210B4, User Manual, Page: 82 / 118

Share
Download
Hanwha Techwin Wisenet XRN-3210B4 User Manual Download Page 82

82_

 live viewer 

live viewer 

cHecKing cAMerA liSt

Displays the camera type, status, and name registered in the recorder.

live > list

Name

Description

a

Channel information

Displays channel information (channel number, video window assignment, and color 

indication).

b

Camera type

Displays a normal camera.

Displays a PTZ camera.

Camera status

Displays the camera error status. 

c

Camera name

Displays the name set for the camera.

 

`

If a camera connection error occurs, it is disabled in the list.

 

`

The camera status display information changes according to the network connection status and settings.

cHecKing tHe SySteM StAtuS

The icon at the top of the screen indicates the status of the system.

Name

Description

Displayed when a problem occurs with the pan or recording status.
Displayed when an error occurs in the power supply.
Displayed when the amount of input data by channel exceeds the set amount of data limit.
Displayed when the hard disk is full during recording and the recording capacity is insufficient. 
Displayed when the hard disk does not exist or needs to be replaced.
Displayed when there is an abnormality in RAID or cannot be used.
Displayed when RAID is being rebuilt.
Displayed when an error occurs in the iSCSI device connection.
Displayed when network overload occurs.

 

`

It occurs in case of excessive CPU load because the reception performance is exceeded. It disappears when you modify the 

Delete Camera or Set Camera to reduce the data rate.

 

`

Limit the number of users remotely monitored by Web Viewer or VMS, or control the number of channels played by remote 

or recorder.

Displayed if the server has firmware to update.

cHecKing uSer id

Displays the user ID and authority for the user connected to Web Viewer. 

Click <

logout

> to log out the logged-in user.

 

`

If you are logged in with an admin account, the authority setting window will not be displayed. 

Summary of Contents for Wisenet XRN-3210B4























































































































Reviews:

No comments