manualshive.com logo in svg

Hanwha Techwin Wisenet XRN-3210B4, User Manual, Page: 78 / 118

Share
Download
Hanwha Techwin Wisenet XRN-3210B4 User Manual Download Page 78

78_

 setup

setup

checking the event log

You can search recorded events including alarms, camera events and video loss.

It also shows the log and its timestamp. 

Setup > System > log information > event log 

•  Search date : Select the date to search the event log by using the calendar window that appears when the 

calendar icon is selected or by using the arrow buttons.

•  Search : Specify the date and press this button to display the search result in the log list.
•  CH : Select a channel to search.
•  Type : When there are too many logs, you can display logs of the desired format by selecting the type. Select the 

desired type and click <

Apply

>.

•  First page/Last page : Move to the first/last page when there are many search results.
•  Export : Save all the logged information recorded in the Recorder into the storage media.

checking the export log

You can search the user who performed the export and the execution time and details (time, channel, device, file 

type).

Setup > System > log information > export log 

•  Search day : Select the date to search the export log by using the calendar window that appears when the 

calendar icon is selected or by using the arrow buttons.

•  Search : Specify the date and press this button to display the search result in the log list.
•  First Page/Last Page : Move to the first/last page when there are many search results.

Summary of Contents for Wisenet XRN-3210B4























































































































Reviews:

No comments