English _
9
!
INST
ALLA
TION & CONNECTION
Powering and networking
Connect the PoE+ device with the PoE+ port of the camera.
J
`
Connect and use a PoE+ enabled router.
`
Use a
PoE+
device that complies with the IEEE 802.3at standard.
`
If you connect using a PoE+ enabled router, you don’t need a separate power supply cable to power it on.
Network Cable Specification
Item
Contents
Remark
Connector
RJ45 (10/100BASE-T)
Ethernet
10/100BASE-T
10/100 Mbps
Cable
Category 5e or higher
Max Distance
100 m
DC Resistance ≤ 0.125 Ω/m
PoE+ Support
IEEE 802.3at
CONNECTING WITH OTHER DEVICE
Grounding cable
Monitor for installation
Power
PoE+ Router
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
`
If the screen freezes for about 1-2 seconds at a certain time interval or when there is a change in the temperature of the
surrounding area, this is normal; the screen is simply undergoing a calibration process.
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Summary of Contents for Wisenet TNM-3620TDY
Page 1: ...THERMAL NETWORK CAMERA User Manual TNM 3620TDY ...
Page 22: ......
