Hanwha Techwin Wisenet PRN-6400DB4, User Manual, Page: 67 / 125

English
_67
●
Setting the Dhcp ip address of the Broadband router
1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the
Broadband Router and enter the router's address (ex : http://192.168.1.1).
2.
At this stage, make the local PC's windows network configurations to the below example :
example)
IP : 192.168.1.2
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
– Once connected to the Broadband Router, it prompts with password. While entering nothing to the User
Name field, enter “ admin ” into the password field and press < oK > to access the router configurations.
– Access the router's DHCP configuration menu and set its DHCP server activation, and provide the start and
end address.
￭
Start address : 192.168.0.100
￭
End address : 192.168.0.200
￭
Above steps may differ from the router devices depending on the manufacturer.
port Setting
Setup > network > ip & port > port
●
Protocol type : Select the protocol type among TCP, UDP Unicast and UDP Multicast.
●
RTSP port : It is used to transmit the video over the network. The initial value is < 558 >.
●
UDP port : Activated when an UDP item is selected in protocol type. The initial value is < 8000-8159 >,
and the setting value changes in 160 units.
– UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network
(LAN) environments.
●
Multicast IP address : Enter the IP address directly when selecting an UDP Multicast.
●
Multicast TTL : Enter the TTL value when selecting an UDP Multicast. The initial value is set to < 5 >, and enter a
value between 0 and 255.
●
HTTP port : Enter the port value for the HTTP web viewer. The initial value is set to < 80 >.
●
HTTPS port : Enter the port value for the HTTPS web viewer. The initial value is set to <
443
>.
￭
HTTPS is an enhanced version of the HTTP web communication protocol. If security is important when accessing the web viewer, enable the HTTPS
port.
●
Cam proxy port : Sets the camera proxy port. The initial value is set to < 10001 >.
DDnS
If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected.
Setup > network > DDnS
●
Server : Specify the use of DDNS and select a site that you registered.
●
Server name : Enter the server name registered with the DDNS site.
●
Product ID : Enter the product ID registered with the DDNS site.
●
Host name : Enter the host name registered with the DDNS site.
●
User name : Enter the user name registered with the DDNS site.
●
Password : Enter the user password registered with the DDNS site.
￭
If you select < Off >, the input box will be inactive.
￭
If you select < ddns.hanwha-security.com >, the host name input box will be inactive.
●
Quick connect : Appears if the <
ddns.hanwha-security.com
> is selected for a <
Server
>.
To use the function, set to <
enable
> after connecting the Recorder to a UPnP router.
￭
If you are setting up a port that is already in use, then the connection might fail. Check the port setup of your router.
￭
Server name, product ID, and quick connect can be displayed if you set <
Server
> to <
ddns.hanwha-security.com
>.
￭
DDNS is a short form of Dynamic Domain Naming System.
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.com) to an IP
address consisting of numbers (64.233.189.104).
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the domain name
can be routed to the IP address even if the IP is changed in a dynamic IP system.
• S
etup