Hanwha Techwin WiseNet HCB-6001, User Manual

Page: 29 / 40

English_29
●
C
a
mer
a
Oper
ati
O
n
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- COAX : You can select whether to use COAX communication.
- RETURN : Return to the SPECIAL menu.
y
IMAGE ADJ
❶ MM If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
❷ MM
Select a desired mode using the
Function Setup switch.
- GAMMA : The setting range is 0.35 ~ 1.0.
The closer to 1.0 the setting is,
the darker it gets.
- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the
higher the PED level gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.
Increase or decrease the level of each mode to adjust the level of sharpness.
y
OFF : Released state
y
ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
`
If you increase the SHARPNESS level too high, the picture may become
distorted or noise may appear.
y
DAY/NIGHT:
You can display pictures in color or in black and white.
➊ If the SPECIAL menu screen is displayed, use the Function Setup switch so that
the arrow indicates ‘DAY/NIGHT’.
➋ Select a desired mode using the Function Setup switch according to the picture
display you want.
IMAGE SETuP
▶
1.
GAMMA
uSER
2. PED LEvEL
I
IIIIIIIIIIIIIIIIIIII
5
3.
COLOR GAIN
IIIIIIIIIII
I
IIIIIIIII
50
4. H-REv OFF
5. v-REv OFF
6. SHARPNESS ON
7.
RETuRN