English_13
●
introduc
tion
Rear view
1
Function Setup switch
Press the Function Setup switch briefly to display the menu screen.
After the menu is displayed on the screen, move the cursor <up/down/left/right> to select
the desired item or to change the value or status.
Also, pressing the Function Setup switch for 2~4.9 seconds will enable the simple focus
function, And pressing and holding it for 5 seconds will change the VIDEO FORMAT setting.
2
Power LED :
This lamp is lit when the camera is receiving power normally.
3
video OuT Terminal :
Sends video signal and connects to the Video IN port of a AHD DVR.
4
Ground terminal
5
Power input terminal :
Connect the designated power supplies.
6
RS-485 Control Port :
You can control SETUP MENU through this port by using external
controllers like a Remote controller that RS-485 Communication
is supported.
7
D & N Input Port :
You can switch to Day & Night Mode by connecting an external signal
to this port.
8
MD Output Port :
Motion detection signals are output through this port.
9
GND
Num
Name
I/O Direction
1
RS-485+
I/O
2
RS-485-
I/O
3
DN
I
4
MD
O
5
GND
-
External I / O port configuration
VIDEO
4 : MD
5 : GND
1 : 485+
3 : D/N
2 : 485-
POWER
1
2
3
4
5
9
8
7
6
Summary of Contents for WiseNet HCB-6001
Page 1: ...High Resolution Box Camera User Manual HCB 6001 ...
Page 38: ...38_ specifications Dimension Unit mm ...
Page 39: ...MEMO ...
