English_25
●
C
a
mer
a
Oper
ati
O
n
M
`
Some lenses may not work properly, depending on the setting of the BRIGHTNESS
LEVEL.
y
SHuTTER :
You can select the shutter.
- MIN : 1 ~ 1/12000
- MAX : 1/60 ~ 1/12000(NTSC) , 1/50 ~ 1/12000(PAL)
- A.FLK : Select this when you experience picture flicker, this happen when there is
a clash with the installed lighting frequency.
M
`
The greater the shutter value the brighter the screen is but the more the residual
images of objects there are.
`
If the min shutter value is large, it can cause noise, spots and white areas but still operate
normally.
`
If you do not use the AGC mode on the exposure menu, it cannot be set above
1/60sec.
`
Depending on the setting range of the minimal/maximal shutter, the screen
exposure can become saturated.
y
AGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH)
:
The higher the gain level, the brighter the screen - but the greater the noise.
y
SSNR4 :
This function reduces the background noise in a low luminance
environment.
- OFF : Deactivates SSNR4. Noise is not reduced.
- ON : Activates SSNR4 so that noise is reduced.
M
`
When adjusting the noise reduction level in the SSNR4 mode, remember that the
higher the level set, the more the noise level will be reduced, as will the brightness of
the image.
BACKLIGHT
The camera uses high performance DSP chips that are designed to clearly display the
object and the background despite severe reverse light.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Function Setup switch. so that the arrow indicates ‘BACKLIGHT’.
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
Summary of Contents for WiseNet HCB-6001
Page 1: ...High Resolution Box Camera User Manual HCB 6001 ...
Page 38: ...38_ specifications Dimension Unit mm ...
Page 39: ...MEMO ...
