background image

CDMA WLL User’s Manual                                                                                                        HTP-800/1900/810

 

 

 

38

 

 

 

 

 

The PC Fax & Modem menu is used to set the phone to data receive mode when using Data 

Service to receive a facsimile to PC or when communicating to PC. 

 

7.5.1 Definition 

HTP-800/1900/810 provides Data and Fax service.  It is capable of transmitting and receiving 

Data or Facsimile information through a wireless path by being connected to a Notebook (or 

Desktop PC).   

The following services are available. 

 

 

Async Data Service 

-

 

File transmit and receive 

-

 

PC communication 

 

PC Fax Service 

- Wireless Fax transmit/receive using the Winfax or Hotfax 

 

Packet Data Service 

-

 

FTP, Internet, Intranet, LAN, E-Mail etc. 

 

7.5.2 using the data service 

To receive data using the Async Data Service and PC Fax Service. 

[Note] 

This phone supports both Async Data Service benefiting the large capacity of file transmission at 

up to 153Kbps as the international standard and Packet Data Service ideal in the business which 

requires the frequent access. 

An Internet account (free or charged) must be acquired by a service provider to use the Packet 

Data Service, 

 

 

 

 

 

7.6.1 Definition 

The removable user identity module (R-UIM) is similar to the SIM card concept in the GSM standard. It is 

7.5 Data/PC Fax

 

7.6 R-UIM

 

Summary of Contents for HTP-1900












































Reviews: