CDMA WLL User’s Manual HTP-800/1900/810
32
NOTE: The lock code is preset to ‘0000’ at the factory.
4.
Press <3(Auto Lock)> to select ‘SET LOCK ‘, and you can set the desired lock state.
Choice “Never, On power up, Now Aways.”
The default setting is “Never”.
5.
Press <*(
▲
)> or <#(
▼
)> to select the status, ‘SET’.
6.
Press <Store> to auto lock the phone. –LOCKED – displays.
If you try to dial numbers, it will ask you to key in Lock Code.
NOTE: The lock code is preset to ‘0000’ at the factory.
7.
If you want to unlock the phone.
8.
Follow the same steps above and select ‘never’ on the step 5.
1.
Press <Menu>.
2.
Press <7(Security )> to select ‘Security’ and then enter the current lock code.
NOTE: The lock code is preset to ‘0000’ at the factory.
3.
Press <1(New code)> to select ‘New Code’.
4.
Enter your new lock code.
NOTE : The lock code must be four numeric digits.
5.
Press <Store>.
6.
Re-enter new lock code for verification.
7.
Press <Store> to confirm.
NOTE: If the digits for confirmation is not matched with digits you enter first, ‘DO NOT
MATCH TRY AGAIN!’
displays. You can repeat from step 4. above.
When you purchase your phone, the lock code is preset to 0000. You can change the lock code to any
4-digit code.
6.5 Changing the lock code
SET LOCK
▶ Never
5 : AUTO LOCK
6 : MY PHONE #
2/14[TH] 2:56PM
LOCKED
Enter Lock Code
------
1 : Greeting
2 : New Code
ENTER NEW CODE
------
RE-ENTER CODE
------
