DSO3062L/DSO3062AL
Digital Oscilloscope
USER’S MANUAL 1
General Safety Summary
Review the following safety precautions carefully before operate the device to avoid any
personal injuries or damages to the device and any products connected to it.
To avoid potential hazards use the device as specified by this user’s guide only.
■
To Avoid Fire or Personal Injury
■
Use Proper Power Cord.
Use only the power cord specified for this product and certified
for the country of use.
■
Connect and Disconnect Properly.
Do not connect or disconnect probes or test leads
while they are connected to a voltage source.
■
Connect and Disconnect Properly.
Connect the probe output to the measurement
device before connecting the probe to the circuit under test. Disconnect the probe input
and the probe reference lead from the circuit under test before disconnecting the probe
from the measurement device.
■
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and
markings on the product. Consult the product manual for further ratings information before
making connections to the product.
■
Use Proper Probe.
To avoid shock hazard, use a properly rated probe for your
measurement.
■
Avoid Circuit or Wire Exposure.
Do not touch exposed connections and components
when power is on.
■
Do Not Operate With Suspected Failures.
If suspected damage occurs with the device,
have it inspected by qualified service personnel before further operations.
■
Provide Proper Ventilation.
Refer to the installation instructions for proper ventilation of
the device.
■
Do not operate in Wet/Damp Conditions.
■
Do not operate in an Explosive Atmosphere.
■
Keep Product Surfaces Clean and Dry.
