12
3
）E
longate the exhaust pipe and snap the flat end of the exhaust pipe joints into the
hole of the window sealing plate assembly (as shown in Fig.5 and Fig.6) .
Notes
：
1
、
the flat end of the exhaust pipe joints must be snapped into place.
2
、
The pipe cannot be distorted nor has substantial turning (greater than
45 °). Keep the ventilation of the exhaust pipe not blocked.
Figure
5
Figure
6
Important notice:
The
length
of
the
exhaust
hose
shall
be
280~1,500mm,
and
this
length
is
based
on
the
specifications
of
the
air
conditioning.
Do
not
use
extension
tubes
or
replace
it
with
other
different
hoses,
or
this
may
cause
a
malfunction.
E
xhaust
host
must
be
not
blocked;
otherwise
it
may
cause
overheating.
VI.Drainage Instructions
This machine has two drainage methods: manual drainage and continuous
drainage.
1
．
Manual drainage:
1)
When the machine stops after the water is full, turn off the machine power and
unplug the power plug.
Notes
：P
lease move the machine carefully, so as not to spill the water in the
water pan at the bottom of the
EN
