5. Electrical Connections
41
NOTICE
Properly use the fitting tools and apply the following torques as maximum
values:
For M4 - 1.5 Nm, for M6 - 5 Nm, for M8 - 20 Nm and for M10 - 40 Nm
When securing the handle, do not tighten the screw more than required.
b.
Assemble the cable gland into the hole of the Grid Switch Box.
[Figure 5-19: Assembling the Cable Gland]
NOTICE
The cable gland is not included in the product package.
For installation, it is required to be purchased separately.
The M25 x 1.5 mm product is recommended.
c.
Check the wiring diagram of the Grid Switch Box.
[Figure 5-20: Wiring Diagram]
