4. Installation
21
1.
Select the drill proper for specifications for drilling specifications.
2.
Remove the dust from the hole, then separate the nut and the washer to insert both the
bolt and the cap.
3.
Set the product in place, assemble the washer and the nut to the bolt, and then use the
spanner to fasten the nut (7 Nm).
Required tools for installation
[Figure 4-6: A Flat head driver for the front cover knob (larger than 10 mm)]
[Figure 4-7: The Plus head driver (No.2) for the tray, the side cover, and grounding]
[Figure 4-8: A spanner for fastening use]
[Figure 4-9: A fork lifter with height of 85-200 mm]
