Hanskamp MultiFrame, Installation Instruction

Page: 2 / 8

2 - 8
Hanskamp AgroTech B.V. (the Netherlands) www.hanskamp.nl/en
MultiFrame
EN
075 - 000 - 000
Montage MultiFrame
1. Decide for mounting the MultiFrame, where the MultiFrame should
hang. The distance between the MultiFrames is dependent on the
type of milking parlour. The position measurements are, therefor, to
find in the drawing of the milking parlour.
2. When the distance is determined, the holes can be drilled according
to the dimensions as shown in the drawing.
3. Now install the MultiFrame on the wall. (Mounting material not in-
cluded).
X ≈ 2000mm - 2300mm
X
1
= depending on the size of the animal, measure this.
Mounting Feedtrough
1. Install the feedtrough in the MultiFrame. The feedtrough is easy to place in the
frame by sliding it obliquely below the 2 vertical tubes which are welded to the
ring. When the edge of the feedtrough is placed under the vertical tubes, the
feedtrough can be placed on the ring. The feedtrough
is now secured on one side.
2. Secure now the other side of the feedtrough with sup-
plied mounting material as shown in Figure 3.
1
2
3
4
007 - 522 - 000 007 - 522 - 001
There are two types of feedthroughs available. The perfora-
ted feedtrough (art.nr.: 007
- 522 - 000) and the traditional
feedtrough with one hole. (art.nr.: 007 - 522 - 001).
X
X
1