10
-
17
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
FeedStation
EN
42000
6.
Place the feedtrough (Item No. 004
-
203
-
000) between the side fences and fix it to the
connecting gate and side fences (Fig. 8). The mounting components for this
have been supplied.
7.
Attach the M8 carriage bolt with M8 locknut to the feed trough. Pushing this up
will allow any fluid to be easily discharged from the feed trough (Fig. 9).
Please note! Do not tighten the locknut completely, otherwise it will not be
possible to push up the carriage bolt and it will not serve its cleaning
purpose.
8.
Attach the cable guide tube (art.nr. 004
-
208
-
000) to the side rail. Do this by using
the supplied parallel clamps. Cut out the round hole from the manger with a side
cutter . Insert the cable guide in the cutted hole. By means of the second M10x55
bolt, the parallel clamp can be securely attached to the FeedStation and prevent
rotations or shifting of the cable guide. The cable which comes from the PipeFeed-
er can be slided through this tube.
8
9
001
-
508
-
000
001
-
769
-
000
10
Editing cable guide tube
Art. Nr.: 004
-
208
-
000