Hanshen TIG200P, Operation Manual

Page: 5 / 17

4
3. RANGE OF WELDING PARAMETERS
table 1. the range of welding parameters
TIG200P
TIG MMA
Rated input voltage(V) 1-Phase
，
220V±10 %
，
50/60Hz
Rated input current(A) 17.5
Rated input capacity(KVA) 6.6
Rated output current(A) 200 160
Rated load voltage
（
V
）
18 26.4
Idle voltage
（
V
）
≤113 ≤113
Rated duty cycle(%) 35
Crest current(A) 10
～
200 10
～
160
Base current(A) 8
～
200 /
Pulse frequency (Hz) 0.5
～
200 /
Pulse rate 0.1
～
0.9 /
Post flow time(s) 1
～
10 /
dimensions(W×D×H mm) 430
×
195
×
380
Weight
（
Kg
）
18
4. INSTALLING & CONNECTING
(1).POSITION FOR USING
place the welder on the dry, clean and solid smooth ground.
The following spots are not allowed
：
a. the place under the sunshine and rain.
b. the spot with dust, flammable gas or oil gas.
c. the spot with harmful or caustic gas.
d. the spot with high-humidity steam.
e. easy impacting spot.
f. The distance between each other less than 30cm.
g. the spot with surrounding temperature higher than +40℃ or less than -10℃.
Model
Parameter
Item