6
VPIFb
FEB 2008
RETRO-FIT KITS FOR EXISTING SEALED
MOTOR VALVE INSTALLATIONS
Retro-fit Kits are available to add the VPIF to existing
Sealed Motor Valve installations. Kit number 75-1210
includes the VPIF, cables and junction box with wire
nuts. The VPIF is simply spliced into the existing
wiring. All wires are numbered each foot to aid in
correct wire connections.
T o a d d a q u i c k d i s c o n n e c t c o n n e c t o r
o n S e a l e d M o t o r Va l v e p o w e r h e a d , u s e K i t
number 75-1211, which includes a field solder male
cable connector.
See Figure E
for the correct
terminal.
VPIF FIELD SOLDERED CABLE CONNECTORS
(For 75-1211 VPIF Retro-fit Kit)
Figure E
MALE
(BACK SIDE)
YELLOW/GREEN
STRIP LENGTH:
A= .150”
B= .400”
1) EACH WIRE HAS A NUMBER IDENTIFIER (1-6). GROUND ( YELLOW/GREEN) TO #7 PIN.
2) MATCH UP EACH WIRE TO ITS CORRESPONDING CONNECTOR POSITION AND SOLDER.
