Hansen HP63, Operation Manual, Page: 6 / 18

5
4
、
INSTALLING &CONNECTION
4.1 Operate situation
Welding machine must put on flat
、
cleaning and dry ground. Forbid to put the
welding machine on following situation:
a. Under hard sunshine and raining place
；
b. With dusty and combustible gas place
c. With harmful or caustic gas place
；
d. With high temperature and steam place
e. Vibration and collision place
f. The distance between other circumambience smaller than 50 cm
g. The temperature higher than +40
℃
or lower than -10
℃
4.2 Ground connecting
Connect the machine’s ground connecting port to power’s ground connecting
port and avoid damaged by electric shock.
4.3 Ventilation
To assure welding quality must reduce the wind influence. If operate in seal
space should supply aeration equipment and avoid lack of oxygen.
4.4 Power and line
Table 3 -power and line
Model HP63 HP100 HP160
Power 3-Phase
，
AC 380V/415V 50Hz
Capacity
Power ≥ 12KVA ≥ 18KVA ≥ 34KVA
Engine 2 times than 12KVA 2 times than 18KVA 2 times than 34KVA
Input
Protect
Equipment
Fuse 20A 30A 55A
Leak electricity
safeguard
machine
20A 30A 55A
Input cable(mm2) ≥ 4mm2 ≥ 6 mm2 ≥ 10 mm2
Output cable(mm2) ≥ 10mm2 ≥ 16 mm2 ≥ 25 mm2
Groud cable(mm2) ≥14 mm2 ≥14 mm2 ≥14 mm2