Hansen HP63, Operation Manual, Page: 3 / 18

2
1、
CHARACTERISTICS&APPLICATIONS
HP100 air plasma cutting machine, can invert the working frequency DC of
50Hz into the high frequency of 20KHz, with IGBT and soft switch technology and
application of PWM technique, then reduce voltage, rectifies current and output a
high DC power source and suitable for cutting. The character is as follows:
The machine is projected by adopting entire-bridge inverter technique and with
IGBT elements.
1. Inverter frequency is above 20KHZ by adopting PWM technique.
2. Can preset and continuous adjust the current, suitable for different thickness work
piece, make sure cutting quality and save energy.
3. Arc ignition of cutting machine is adopted with small flow of air and HF transfer
arc method for 100% arc ignition.
4. With over-heat
、
over-current and arc starting protection.
Suitable for application:
Such as carbon steel, alloy steel, nonferrous metals etc.
For operation in machinery industry, petroleum industry, ship building industry,
vehicle industry, electricity industry and decoration.