Page EN-13
Cleaners
Add dishwasher salt:
– with water hardness ‘medium’ to ‘hard’,
– prior to using the dishwasher for the first
time,
– when the control display for dishwasher
salt lights up.
1. Remove the lower dish rack (15).
(18)
2. Turn the cover on the dishwasher salt dis-
penser (18) anticlockwise and remove it.
3. Upon first use: Add 1.5 l water to the dish-
washer salt dispenser so that the dish-
washer salt does not clump.
4. Place the filling funnel supplied b over the
dispenser opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt dis-
penser (18) in a clockwise direction up to
the stop point.
8. Replace the lower dish rack (15).
9. Launch a dishwashing programme
straight away or carry out a test run im-
mediately upon first use using see „Initial
commissioning“ on page EN-10).