Operation
Page EN-16
■
Never pull the mains cord
out beyond the red marker.
Pulling the cord out further
can damage the cable reel.
(24)
(25)
red
yellow
1. Pull the mains cord (24) out by
the mains plug (25) until the
yellow marking is visible on the
mains cord (24).
If the red marking is visible, the
mains cord has been pulled
out too far. Allow the mains
cord to retract slightly (see
section "Finishing vacuuming“
on page EN-18).
2. Insert the mains plug (25) into
a properly installed socket.
(1)
3. Use your foot to operate the
on/off foot switch (1), to switch
the appliance on.
4. To vacuum, push and pull the
nozzle across the surface you
are vacuuming.
Rotate the telescopic tube
handle (12) slightly to reach
corners more effectively. This
positions the nozzle diagonally.
In rare cases this can make
a whistling noise initially.
This is not a malfunction
and stops after a while.
