Operation
Page GB-16
Operation
0000
Before getting started
• Read chapter “For your safety“ on page
GB-4 and all the safety notices.
• Install the exhaust hood as described in
chapter “Assembly“ on page GB-11.
1200
(16) (17) (18)
(22)
(21)
(20)
(19)
Switching the appliance on
and off
• To switch the appliance on, touch the sen-
sor (16) . An audible signal will sound;
the colour on the display will change to
blue.
• To switch the appliance off, touch the
sensor (16) again. An audible signal
will sound; the colour on the display will
change to white.
Setting the time
When the appliance is first connected to the
mains, the time displayed is
12:00
.
To change Central European Time
(CET) to daylight savings time, you
need to manually set the clock forward at
the end of March and back again at the end
of October.
1. Switch on the appliance as described in
the chapter “Switching the appliance on
and off” on page 18.
2. Touch and hold the sensor (17) for
about three seconds. An audible signal
will sound; the display
12
will start to flash.
3. Use the sensors (20) and (21) to set
the hour.
4. Touch the sensor (17) again. An au-
dible signal will sound; the display
00
will
start to flash.
5. Use the sensor (20) to set the minutes.
6. Touch the sensor (17) or the sensor
(16) again to finish setting the time.
Switching on the fan
The fan has three settings: (20) low, (21)
medium and (22) high.
• To switch the fan on, touch the sensor for
the desired setting. An audible signal
will sound; the colour on the display will
change to blue.
