Page EN-15
Cooking zones/areas and sensors
Operating time limit
Each cooking zone/area is provided with an
operating time limit. If the heat setting is not
changed for a prolonged period of time, the
cooking zone/area is automatically switched
off and the residual heat indicator “H” is ac-
tivated.
The maximum operating time is set in accord-
ance with the most recently selected heat set-
ting.
Heat setting
Maximum operating time
1, 2, 3
8 hours
4, 5, 6
4 hours
7, 8, 9
2 hours
Cooking area
It makes sense to use the cooking area if you
wish to use a large pot or roaster.
Please observe the correct positioning of the
cookware:
• Always place the cookware in the middle
of the cooking area.
• When using oval or rectangular roasters,
ensure that the middle covers both cook-
ing area sections.
• The cookware should cover at least ¾
of the cooking area. It is not advisable to
place a round pot in the centre of a cook-
ing area.
(8)
1. Touch the selection sensor (8) for the
cooking area.
2. Set the desired heat output using the slid-
er sensor (12).
Booster function
When the boost function is active the cooking
zone/area heats up at maximum power for 5
minutes. After this time the cooking zone/area
returns to the original heat setting. If the orig-
inal heat setting was “
0
”, the cooking zone/
area heats up to heat setting “
9
”.
The booster function is advisable e.g. for rap-
id searing or boiling water. It is also suitable
for fast boiling and continued cooking at a
reduced temperature. First select a medium
heat setting (e.g. “
5
”) and then activate the
boost function.
The booster function can be switched on for
all cooking zones and the cooking area.
1. Press the sensor for the cooking zone/
area that you wish to use the booster
function for.
The heat setting display of the cooking
zone/area flashes.
(11)
2. Touch the boost sensor (11).
“
b
.” now appears in the heat setting dis-
play.
3. In order to deactivate the booster function
early, touch the sensor for the cooking
zone/area for which you wish to deacti-
vate the booster function.
4. Touch the boost sensor.
“
b
.” will go out in the heat setting display
next to the selected cooking zone/area and
the original heat setting will once more be
displayed.
Summary of Contents for MC-IF7127B2C-A
Page 34: ......
