Page EN-22
Automatic control functions
Automatic control functions
The following functions run automatically. You
cannot change them.
Foam detection
The electronic foam detection makes sure
that more water is added to the first rinse cy-
cle for certain amounts of foam.
Overflow protection system
This system prevents the water from leaking
out over the dispensing drawer. As soon as
a certain water level is exceeded, the outlet
pump will automatically switch on.
Dynamic quantity control
If your appliance is loaded to only half of the
maximum capacity, for certain cycles the
water consumption and cycle duration will
reduce. Also adjust the amount of detergent
accordingly.
Imbalance correction system
This system protects your appliance in the
event of a too-great imbalance once spinning
starts. This can happen with small loads or
with large individual pieces of laundry. The
laundry is distributed again and the spin
speed increased if the laundry distribution is
right.
Summary of Contents for HWM5T110D
Page 78: ......
