Start-up
Page EN-39
Connect the water filter
You will need these parts to connect the water
filter (43):
(42)
2× Hose coupling
(51)
2× Safety clips
(54)
1× Inlet hose
(43)
(42)
(42)
1. Insert the hose couplings (42) into the wa-
ter filter (43) and firmly press them down.
(55)
(56)
2. Remove the cap (55) from the white appli-
ance hose (56).
(56)
3. Insert the end of the appliance hose into
the hose coupling to which the arrow on
the water filter is pointing until it makes
contact.
(51)
4. Fix the appliance hose in place using a
safety clip (51).
5. Insert one end of the inlet hose (54) into
the available hose coupling on the water
filter until it makes contact and fix the inlet
hose in place using a safety clip.
(54) (56)
Disconnecting the hoses
1. Remove the safety clip(51).
2. To do this, push the connector ring on the
hose coupling (42)on or(58) in the direc-
tion of the hose coupling using a small
slot screwdriver while pulling off the hose
coupling.
